If possible, you can have it connected to your PC while you're installing the module ok? So you don't forget to connect when you launch. You should have the hardware dongle on standby. Now, once you've done that, install this CM2 MTK module. You should also have your VCOM drivers installed, we have a guide on how to do that so check that out on our Forum. I'll be flashing in scatter format as you can see. You need to have the module which you're going to be installing and the firmware which you're going to be flashing. Quote:In this video tutorial, I'll be explaining how to flash a Mediatek Android phone using Chinese Miracle 2 MTK module. Ensure to load a DA file for a Secure Boot device if CM2 doesn't have one for it.Should you decide to flash a firmware for another build number, try to backup your firmware so you have something to revert to should the firmware you flash brick your device.Only flash firmware for your phone model (and build number if you can find it) as doing otherwise could brick the device.Avoid interrupting the flashing process as this could cause the device to go dead.If you are using a loader version then you are entirely responsible for ignoring any virus warning you get.Only installing the setup and running it will fail Infinity CM2 ideally requires a hardware box to work.You should get a Done message once flashing is complete.CM2 MTK should begin flashing to the partitions, do not interrupt.
Once you see wait for phone., power off the phone (still with battery inside) then connect to PC via USB cord.The firmware's details should get displayed, tick or untick the boxes under Settings depending on what you wish to achieve.In the Window that pops up, select the bin firmware (if you'd selected bin) or the scatter file (if you'd selected scatter) then click Open.If you ticked bin then click the Bin button, else click the Scatter button.Tick the bin or scatter radio (depending on the format of your firmware).Select your phone's chipset under Settings > CPU.
0 kommentar(er)
